Start-up Guide for Transport Commander

General Steps

1. Order Entry (enter a transport order).
2. Print (labels, manifests, bill of lading, CMRs etc.)
3. Add Contacts (enter drivers, transporters, expeditors etc.)
4. Dispatch (assign orders to contacts, send instructions and EDI data to contacts).
5. EDI (export data to partners or your own ERP systems)
6. Follow (follow the progress of your orders (Track & Trace)

How to start

• Go to TransportCommander.com ( What is it? ).
• Choose Login from the Menu at the top of the page.
• Type your email address and your password.

  No Login?

• If you already use CargoOffice or another FC-product, recognized by the logo, you can use the same login, you don't need to register.
• Otherwise you need to register; use the Register link at the bottom of the page

• If you experience any problems, then please use the Contact link at the bottom of the page and ask us.

Order Entry

The next step is to enter a transport order and assign it to a carrier.

Click the button on the top left of the page (the button that shows your company name and logo):

The order entry form appears.

The form should be pretty much self explanatory.
Pick-up and delivery addresses will be remembered in your private storage for future use and the data for the select boxes can be changed in your Settings (Menu->Settings).

Example order entry form:

Use the Submit button at the bottom of the page to store this order in your private storage.

For a more detailed explanation of the order entry form see; OrderentryStart

If you have any questions or require changes in this form, please use the Contact link and ask us. We have many ready to use templates for many different type of businesses.

After entering an order you will see the order back on the main page. Each line has three buttons in front of it:
Change the order
Change the status of the order
Print labels, manifests, bill of lading, CMRs etc.

Now, before we can Assign (send) this order to a transporter or a carrier, you have to enter these carriers and transporters into your private storage using the Contacts section. This is explained below.

Add Contacts

The next step is to enter your Contacts (transporters, carriers, subcontractors and even your own drivers (if you have them).

• Click the Menu button (upper right corner) and choose Contacts:

Find contact

The form below appears, allowing you to add contacts and companies:

• Type the email address, name or company name of your contact:

An Unknown Contact

If you see a message like: Email address not found and the email address you typed in is correct, then the contact is probably not a member of the community. However, you can still add the contact:

you can click: Click HERE to add it anyway and proceed from there.

Note1: You can also use https://www.transportguide.info to find and add contacts (mainly transport providers). Login there with the same user ID and password.

Note2: The community includes more than 1.5 million users and over 17.000 company members.

A Known Contact

If your contact or his company is known in the community, you will see the name appear in the search results.

• Use the Add Contact button to add someone to your contacts.
• You can also create a Group and add your contact there, see: NetworkContacts.
• Below is an example page to add a contact to a group named Scandinavia for specializedcarriers in that region.
  

Dispatch

Now you have entered your Contacts we can Assign (send) orders to these contacts (transporters, expeditors, subcontractors or whatever contact you entered). The assignment of transport orders is called Dispatch.

Choose Dispatch from the menu:

The Dispatch / Planning page appears:

  Explanation

• The main page shows a split screen, as you can see in the example above.
• The Left side shows your Contacts (drivers, transporters etc.)
• The Right side shows the jobs-to-do (orders).
• The order you entered earlier should visible be on the right side, otherwise go back to Order Entry or click the New button (red arrow in the example page above) to enter a new order.
• The general idea is to select one or more orders on the right and a contact on the left and then click the [p+d] button (blue arrow). [p+d] means pick-up and delivery.
• If you did it right, the left side of the page now shows two symbols, like in the example above. The symbol pointing up means a pick-up action and a symbol pointing down a delivery action.

  The output

• You might have noticed that you received an email by now, probably two emails.
• These are the result of the status change of the order, the status of the order is now assigned.
• You can forward these emails to your carrier, driver or subcontractor.
• You can change the layout and content of these emails (Statuses & actions in the Settings Menu).
• If you look at this setting you will see two actions behind status assigned.
• Click on the action to change it, here are some examples (try them):
• Example email here.
• Example email in html format here.

  More info

• At this stage you might have a lot of questions, please do not hesitate asking. The best way to do this is by using the Feedback link from the main menu.
• If you want to know more about Dispatch and its possibilities then see the Dispatch & Planning page.

Follow (Track & Trace)

You can receive status updates from your contractors and drivers which will be shown on the main page. Different colors indicate whether everything is going alright or if there are problems with a specific order.

Status updates from contractors can be reported by email or by sending EDI files to you. More about this here.

Contractors can also send you PODs (Proof of Delivery) documents or signatures which will be attached to your orders. Depending on how these contractors send you these PODs they need an email address of an FTP account into your Transport Commander account. Use the Feedback button in the menu (top-right corner) and tell us what you need.

Drivers can use their mobile phone to send status updates. More about this here. Again, use the Feedback menu item and let us know if you want to use this and we will set things up for you.

Transport Commander has a lot more functionality than we can describe here. Please let us know what you require. We probably have it and can implement it in minutes. Please use the Feedback menu item and tell us what you need.

Credentials

Apart from contractors sending you status updates, you can also automatically pull status data directly from your contactors TMS system. Provided that you have a log-in at that contractor.

If you want to do that, you need to add your credentials to the respective contacts, as follows:

• Go to the Menu->Contacts page, click on the small menu bar (three bars) next to your contact and choose Info+login.
  For example:

The details of the contact appear on screen.

• Enter the User ID and password that contact gave to you. Example:

• If your credentials are correct then you will see the active shipments on your main page.

Active Shipments

After adding your credentials at each contact, the system retrieves latest status from your shipments at these contacts.
Now you have a main page showing and tracking all your shipments at all your contacts.

Below is an example page.
The companies and their logo's are at the top of the page, followed by the shipments you assigned to them as well as the current status of those shipments.

Note: A red line around a logo means your credentials are not longer valid (or you didn't enter them). Shipments from these contacts can no longer be retrieved and can not be displayed here.

Use the small documents button in front of each shipment to print documents like Manifests, Labels, CMR's, BoL's, etc.

Settings

Click here for all Transport Commander settings

More information or feedback

Use the Feedback button in the menu (top-right corner) of the TransportCommander.com (Login -> Feedback)

We wish you a lot of good business with !TransportCommander.

- 000 -